Craps Board Layout

1. Craps Board Layout
2. Craps Board Layout Creator
3. Craps Board Layout Design
4. Craps Board Layout Ideas

The craps table is covered in felt that is printed with a diagram showing the spaces for the types of bets. There is a center section where Hardways and One Roll bets can be placed. The ends of the table each have sections for the Pass Line, Come, Place, Field, and other bets. The ends of the table are mirror images of each other. Craps Metadata This file contains additional information such as Exif metadata which may have been added by the digital camera, scanner, or software program used to create or digitize it.

Learning how to play craps isn’t as difficult as you might think. People are often steer away from playing the game because they think its too complex, but the only particularly complicated aspect is all the different types of bets that can be placed.

You don’t actually need to learn all of them to start playing and you can just stick to the simplest ones if you like.

You do, however, need to understand how the game is played.

This article will help as we cover everything you need to know to play craps in a live casino or online.

We explain the main objective of the game, the craps table, the betting layout, and the basic rules. We also introduce the different types of bets.

Game Objective in Craps

The main objective in craps is really quite straightforward. Basically you are just betting on the outcome of the roll of two dice.

Craps is pure chance since you can’t affect the outcome in any way, but you do have the choice of several wagers. The majority of these wagers are ultimately based on what combination of dice will be rolled.

The goal in craps is therefore to try to correctly predict which numbers will come up on the next roll. This is, of course, guesswork, but it doesn’t stop the game being a lot of fun.

Craps is played on a specially-designed table that features a betting layout where players can place their wagers. In a live casino, a table would look something like this.

The dice are rolled on the table by one of the participating players, referred to as the shooter. Typically, a new player will become the shooter at the end of each round, although one player may remain as the shooter for several in a row.

Anyone at the table, including the shooter, can make wagers by placing their chips in the appropriate spot on the betting layout.

A craps table requires the attention of several casino employees. You’ll usually find the following people running a table.

The boxman is in charge of the chips at the table. He (or she) will exchange cash into chips for players and swap them for different denominations if required. He’s also responsible for supervising the dealers and generally ensuring that the game runs smoothly.

The stickman is in charge of the dice. He moves them around the table with the use of a stick (hence the name), passing them to the shooter at the start of each roll. He will also announce the outcome of each roll.

A craps table usually features two base dealers, one standing on either side. They are responsible for collecting losing bets and paying out winners. When requested to do so, they can also place certain bets on behalf of players.

The Craps Table (Online Casino)

The rules of craps are the same regardless of whether you are playing in a live setting or online. However, things are a lot simpler online. There’s no allocated shooter, as technically you are the shooter every time you play.

The diced are rolled automatically when you press the relevant button, and you place your bets by clicking in the appropriate place on the betting layout.

The following is an example of what an online craps table looks like:

Basic Rules

Each round in craps starts with what is known as the come-out roll. Most casinos will require that the shooter place a bet before making this roll on either the pass line or the don’t pass line.

If the combined value of the two dice on a come-out roll equals 2, 3, or 12, then this is “crapping out” and the round is over. Players will lose pass line bets and win don’t pass bets. If the come-out roll is 7 or 11, the round is also over.

If any other value is rolled on the come-out roll i.e. 4, 5, 6, 8, 9 or 10, then a point is established, equal to the value rolled, and the round continues into the next stage.

The shooter continues to roll with players betting on the outcome of each, until they roll either a 7 or the point value that has been established.

Following a roll of either 7 or the point value, the round is over and a new come-out roll is required. It’s standard practice for the shooter to pass the dice to another player if a round ends with a 7, and to stay as shooter if the round ends with the point value being rolled.

This is essentially all there is to the basic rules of craps. What makes the game more complex are all the different bets that can be placed.

The following is a list of the different wagers you can place when playing craps.

• Pass Line
• Don’t Pass
• Come
• Don’t Come
• Pass Line Odds
• Don’t Pass Odds
• Come Odds
• Don’t Come Odds
• Place Win
• Place Lose
• Buy
• Lay
• Big 6
• Big 8
• Hardways
• Field
• Any 7
• Any 11
• Any Craps
• Ace Deuce
• Aces
• Boxcar

As you can see, there are numerous different bets in craps. Please don’t let this steer you away from playing the game as you really don’t need to learn them all.

They are pretty simple overall; it just takes a little time to familiarize yourself with each one.

You can read about all these bets in more detail here.

If you’re ready to put what you’ve learned here into action, you might want to consider trying out an online casino. You can play craps at most of the top online casinos that we recommend. If you want to play for real money, you’ll get a bonus for signing up and making your first deposit. And if you prefer to just play for fun, that’s an option at most places, too. Here are some of the online casinos we recommend playing at.

How To Build Your Own Practice Table

New & Improved
Upgraded Practice Table With Shooting Station

Looking for Dice Layouts, Chip Rail and Corners for your table find them here.
Before you start your pactice table, maybe refresh your knowlege of the game with Free Craps Lessons?

Practice Table Construction (updated 05/30/02)

Materials: (total cost about $200)

Tools:

General Info

The sides and bottom base of the practice table are made from one sheet of 4'x8' 1/2' plywood. It can be any type of any plywood, but birch or oak will make a better looking table and will dice will not dent as easily. The top rail of 1/2' plywood adds strength and helps maintain shape and it can be upholstered if desired. It is important to make the table solid. Making the bottom base a single layer reduces cost but compromises authenticity.

By purchasing the plywood at a Home Depot or Lowe’s they will make some of the cuts for you. Two cuts are free. Have the sheet split lengthwise with one side 24' wide. Split the 24' wide strip in two pieces giving 2 - 24'x47 15/16' pieces (you lose 1/8' for saw blade). Depending on size requirements the bottom base could be trimmed to 47 1/2' as shown in the drawing or left at 47 15/16' width. The other piece would be ripped lengthwise twice to make a 9 1/2' x 96' piece and an 11' x 96' piece.

Bottom Base

Attach the two 24'x47� ' pieces together using six to eight 1�' #10 flathead wood screws from the bottom side only. Be sure that the screw heads are flush. Layout the 14�' radius corners and cut with a hand held jig (saber) saw. A router can be used to smooth the edges with a 3/8' round over bit top and bottom. The routing is not essential but it makes the felting easier. Do not cover base with felt until the sides are constructed. When covering with felt an under layer of flannel (purchased from a fabric store) reduces the hardness and makes the surface more like casino conditions.

The banquet table legs are 28' in length. Cut 3' to 3�” off the bottom using a tubing cutter of hack saw. Mount the legs, with the screws provided, to the base about 6' in from the edge. Make sure that the smooth surface (no screw heads) of the base is up.

Side Boards

Cutting of the kerfs, which allow the side board to bend around the corner, is accomplished by setting the saw to a depth of 1/16' less than the thickness of the plywood. Try a couple of test cuts on some scrap or the ends to make sure the cut does not go completely through the plywood . If the depth becomes equal or greater than the thickness of the plywood it will ruin the project. Layout the kerf lines 1' apart (�' or 3/4' makes a smoother turn but is a lot more work). Use a straight edge guide to cut the kerfs with a hand circular saw or a radial arm saw. The radial arm saw, if you have one, makes the job much easier. Make sure that there is a rigid board under the entire length of the side board when cutting as the side board will break at the kerfs if there is no support. The ends should not be cut to length until the board is wrapped on the bottom base and marked and cut.

There are two side boards. The outside side plywood is wrapped around the bottom base with the kerfs facing inward towards the bottom base and with the edge of the outside side flush with the underside of the base. Placing waxed paper around the edge and on top of the base will keep glue in its place. Wetting the smooth surface of the plywood with a spray bottle, where the kerfs have been cut, helps bending. Clamps or temporary nails hold the outside side plywood in place against the base. Do not drive nails all the way in as they will be removed when the inside side board is glued into position.

Apply wood glue to inside surface (kerf side)of the outer side. Carefully bend the inside plywood side (kerf of inside plywood facing the kerf of the outside plywood) into position. Clamp or screw using 1�” #10 screws, the inside plywood to the outside plywood (from the inside). Allow adequate time to dry.

The excess sides may now be trimmed with a saw even with the bottom base.

An optional 2' high plexiglass fence added to the front of the table will keep the dice confined to the practice table. I have found it keeps the dice from bouncing off the table when your friends toss the dice. A precision shooter would never make a shot with that much rebound. The plexiglass starts just above the base. Drill holes in plexiglass and attach with 2 1' #6 round head screws.

Top Rail

Cut out the top rail from the �' plywood using a jigsaw. Align on top of the sides and attach using 1�” #10 screws. You can upholster the top rail with 1' foam and vinyl if desired.

Chip rails can be purchased at http://www.casino4you.com/

Felt

Place the flannel on the base (make sure screw heads are on the underside) and staple. Apply the felt over the flannel and attach using a stapler. Start with the straight edge and stretch and staple.

Diamond Rubber

Attach the rubber centered between the curved portions. Use a rubber adhesive as it is a silicone flexible adhesive that will not become brittle.

Shooting Station for Practice Table Construction

Tools:

The sides and bottom base of the shooting stand table are made from one sheet of 4'x8' 3/4' plywood. The top rail of �' plywood is for the rail padding we lean against so much. Optional chip trays are shown but not described. Email me for details on the chip tray if you want to go to this detail.

By purchasing the plywood at a Home Depot or Lowe’s they will make some of the cuts for you. Two cuts are free. The cutting diagram will help.

Station Bottom Base

Attach the two 24'x36' pieces together using 1�' #10 flathead wood screws from the bottom side only. Be sure that the screw heads are flush to avoid marring any surface you set the table up on. A router can be used to do a 3/8' round over on the top and bottom. Cut 3' to 3�” from each leg of the banquet table legs using a tubing cutter (a hacksaw will work but is a lot more work and the result is not as smooth).

Next attach the banquet table legs. Place them about 6' from the ends of the base and attach with screws provided with the legs.

The base must be covered with felt prior to installing the side. Stretch and staple to the station base.

Side Boards

Sandwich the �' x 36' (9� “ and 11' high) side boards and use 1�' #10 flathead wood screws from the 9�' side to secure the two pieces. Be sure that the screw heads are flush.

Place the sandwiched plywood side board on the felted base and attach with 3 2' #10 wood screws.

Attach the �” plywood, 6�' wide top cap to the side boards using 1�' #10 wood screws. You may add chip rails if you desire. Chip rails are made out of 1' thick mahogany. It takes some woodworking skill to make the chip rails.

The �” x �' x 38' piece must be glued to the �' x 3�' x 38' plywood before the corners are rounded. After this step apply 1' foam over the top and front of the plywood. Staple the vinyl upholstery fabric to the rail for a casino like rail rest.

Happy Shooting

DiceSetter.com

Kerf detail

Quick and Dirty Practice Table

Supplies:

14’ x 5’ Sheet of 1/2 inch plywood or particle board

Craps Board Layout

12’ x 3’ Sheet of masonite

172” x 48” sheet of felt

1Twin size foam mattress pad (twin size)

1Can of spray paint

1Can of spray adhesive

Tools:Circular saw
Drill
Hammer
Staple Gun

Time:
Approximately 2 hours.If you spray paint the mattress pad, perhaps do this step the evening before.

Cost:
If you don’t have to buy power tools, this will cost around $29.

Construction:

Craps Board Layout Creator

• Cut foam mattress pad into a 12” x 6 ‘ length.Spray paint to desired color (optional)
• Cut plywood to be 4 feet wide by 3 feet deep for base.
• With left over plywood, cut another piece of plywood 4’ long by 12.5” high for the back wall.
• Cut 2 masonite sheets 15” long by 12.5” high for side walls

• Drape felt over plywood.Cut to size such that there is about 2” extra around the perimeter of the plywood.Staple felt to the edges of plywood, keeping it taught.
• Screw back wall to the base
• Screw side wall masonite pieces to the base.Make sure that they overlap to the back wall plywood. Screw masonite side pieces to back wall as well.
• Place mattress pad on the table, inside the 3 walls.You will be able to make curved corners.Once you have the fit that you like, spray adhesive on the inside of the back and side wall pieces AND on the back of the mattress pad.Secure into place.Let dry.

<img src='../images/home1.jpg' alt='home1.jpg (123936 bytes)' width='310' height='234' '='>

Options: You can purchase REAL craps table felt with all the markings and REAL back wall pyramid rubber from http://www.gamblersgeneralstore.com .It will significantly increase the cost of building the table.

Here's the practice table Ray built. A beautiful piece of work!

Craps Board Layout Design

(under construction)

(finished practice table)

Craps Board Layout Ideas

Here is a picture of the practice table Big Lou constructed!